Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can get more info reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. This can upvc windows repairs be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. read more Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze, it may be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance check here of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, which can cause a gap where the sash meets frame. If they are damaged beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it is possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes that upvc window repair near me are filled with some sort of filler and can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.